Palm Tree Solar Street Light – Foldable All-in-One Solar Led Street Light with CB IECEE Saber Imaging what you plant at the side of the road is not only solar led street lights but also palm trees. We have spent a whole year inventing this solar led street light, hundreds of detail being designed.
Solar Panel Adjustable: Solar panels can face the sunlight direction at both sides of the road—the efficiency of solar panel increases by 60%.
Good Heat Dissipation: Separated hot solar panel can keep the solar panel from conducting heat to the battery—the lifespan of the battery and LED increases by 40%.
Easier Installation: Wires are not required, only two mounting steps.
Palm Tree solar led street light with CB IECEE Saber Certification, use top materials for government street light project, A-Class LiFePO4 battery with 10 years Lifespan.
Smart MPPT Controller:
The charging efficiency of MPPT controllers is 30% higher than PWM technology.
LiFePO4 Lithium Battery:
High-temperature tolerance up to 65 degrees, Depth of Discharge Up to 99%, 2500 times charge and discharge, Lifespan is 10-15 years.
Double-sided Solar Panel:
Double-sided solar panels can absorb solar energy from both sides. Monocrystalline silicon158*158 solar cell, 21% efficiency rate.
Smart Microwave Sensor:
The effective sensing distance can reach 15m, valid for people and cars.
High Luminous Efficiency LED:
Cree LED 5050, 210lm/w for single-chip, 160lm/w for the whole lamp.
Die-Casting Aluminum Support:
National standard aluminum alloy sprayed with environmental protection paint.
1. Foldable VS Normal
The solar panel of palm tree solar powered street light could rise and fold, which is better for the solar panel facing the sun direction at both sides of the road.
2. Better Heat Dissipation
The solar panel is as hot as 90°C, 70°C inside the solar lamp body in the summer. (we have tested )
Hot will damage the battery and LED source, so we separate the hot solar panel, and it has a shadow, makes solar street light cool, enlarge lifespan of the battery and LED source.
3. Solar panel is wider
The width of the solar panel of Foldable All in One solar street light is 500mm, while normal All in One is only 430mm or 330mm, larger solar panel is the insurance of brightness and longer backup time.
4. Compatible with pole diameter 40-115mm (suggest 76mm)
Other solar street lights can only fit a specific pole diameter
5. Customizable Pattern
6. Easier Installation
No power required, no cables required, two mounting steps
Remote Control Technology
4 working modes as below: ON: Turn on the light OFF: Turn off the light L: 100%-2hrs, 70%- 2hrs, 20%-8hrs. M: 100% if people come close, 30% far away. (Sensor Mode) T: 100%-2hrs, 70%- 2hrs, 50%-2hrs. U: 2hrs-100%, 2hrs-70%, 2hr-50%; sensor start working, when detect movement 50% , 20% no movement. T: 1hrs-50%, 4hrs-100%, 3hr-50%, 4hr-25% S: 6hrs-100%, 6hrs-50% – 20%: Decrease 20% brightness based on original working mode +20%: Increase 20% brightness based on original working mode
Remark: After connecting the wire between the lamp and the solar panel, the lamp will be activated when the solar panel is exposed to the sunlight (no need to use a remoter to turn on the solar light). Default is M mode, and you can choose the modes according to your needs).
3D Photometric Simulation
Light Pole Arrangement Suggestion
4m pole with 40w palm solar street light, pole to pole distance 15m
6m pole with 64w palm solar street light, pole to pole distance 22m
8m pole with 100w palm solar street light, pole to pole distance 30m
10m pole with 120w palm solar street light, pole to pole distance 35m
Is it strong？
Very strong! The base is a triangular support structure, and the internal main support structure has a thickness of 4mm. We have a 120W palm tree solar street light installed in the Philippines, and it is still intact after an 18-level typhoon.
Is it heavy?
For the lamp body to be strong, we use more solid materials, which will be slightly heavier than the conventional integrated street lamps but still much lighter than split street lamps.
Is it lightning protection?
Yes, lightning protection! The shell of the lamp body is all metal. The entire lamp body is equipotential. When lightning strikes, the current will pass through the metal shell to the metal pole to the ground. The current will not pass through the inside of the lamp body, and the electronic components inside will stay Intact.
Is it rust-proof? Yes, the whole lamp shell is made of aluminum and painted, and the aluminum itself is already rust-proof. The hoop connecting the pole is made of iron with hot-dip galvanized. It will not rust even if there are scratches.