Home/ Blogs / Suggestion / The Difference Between Split, All In Two And All In One Solar Street Light: 7-Point Comparison
The battery and the LED light source are integrated together, the solar panel is separated, and the LED light source is not extended outwards.
Battery, solar panel and LED light source are separated. The arm of the light pole extends the LED light source about 1m~1.5m, the solar panel is installed on the top of the light pole, and the wire is 8-25m long to connect all parts. The battery is buried underground or hung on a light pole, the battery can be easily stolen.
The solar panel, battery, and light source are integrated, easy to install, the solar panel cannot adjust the angle
Comparison
Item | All in one solar street light | All in two solar street light | Split Solar Street Light |
---|---|---|---|
Arm Extension | √ Long | × Short | √ Long |
Solar Panel Adjustable | × Not Adjustable | √ Adjustable | √ Adjustable |
Heat Dissipation | × Bad | √ Good | √ Good |
Installation Difficulty | √ Easy | √ Easy | × Difficult |
Total Cost | √ Lowest | √ Low | × High |
Circuit Resistance | √ Low | √ Low | × High |
Battery Anti-theft | √ Anti-theft | √ Anti-theft | × Not Anti-theft |
The main difference
Solar panel angle adjustable, internal circuit resistance, installation difficulty, heat dissipation, arm extension, battery anti-theft,
Total Cost: product cost + labor installation cost + transportation cost + aftersale cost
Generally, street lights will have a support arm to extend the LED light source to the inside of the road, so that a better light distribution area can be obtained on the road
In the northern hemisphere, the solar panel needs to face south; in the southern hemisphere, the solar panel needs to face north. And the higher the latitude, the greater the tilt angle of the solar panel. This can improve the efficiency of sunlight absorption
Heat will cause the lifespan and light efficiency of the LED lamp bead to decrease, as well as the lifespan and capacity of the battery. Solar energy is exposed to direct sunlight, and the highest temperature can reach 90 degrees Celsius in summer. It is of great significance to isolate the hot solar panel from the battery and LED lamp beads as much as possible for heat dissipation.
Simple installation can reduce installation errors, fast construction speed, and save labor costs
Installation video of split solar street light
Solar street lights are low-voltage products, and the internal resistance of low-voltage products accounts for a large proportion of power consumption. The batteries, wires, and controllers in the entire circuit are also resistors. The longer the wires, the greater the resistance. Therefore, the wires of low-voltage products should be as short as possible to reduce power loss.
The comprehensive cost includes product cost + labor installation cost + transportation cost+aftersale cost. Although the product cost of split solar street lights is relatively low, the labor installation cost and transportation cost are relatively high, so the comprehensive cost of split solar street lights is the highest.
The most valuable part of solar street lights is the battery. In many countries, split solar street lights can easily be removed and stolen because the battery is separated. The batteries of all in one and all in two solar street lights are integrated in the lamp shell, not easily stolen.
Above we can see that no matter which one has its own advantages and disadvantages, Shenzhen Moonlight Technology Co., Ltd has developed the Foldable all in one solar street light with all the above performance advantages.
Solar Light Magazine / Solar Street Lights / Author: Cmoonlight
What are the market prospects for solar street lights?
Solar Street Lighting Global Market Outlook - Industry Trends and Growth Forecast
IECEE and Saber Certification in Saudi Arabia
CB Certification of solar street light
Do you really know the certifications of solar street light in your country?
Top 10 Solar Street Light Manufacturers in 2021
2020 top ten manufacturers of solar street lights ?
Are you looking for the best solar street light manufacturer? The popularity of All in one solar street lights has increased manifold in the last decade. This is primarily because of low maintenance and assured bene
Table of Contents:
1. Don’t just look at the parameters only
2. Cheap & low quality solar lights= Waste Money
3. Local temperature, latitude
4. The heat dissipation performance of
All in Two solar street light
The battery and the LED light source are integrated together, the solar panel is separated, and the LED light source is not extended outwards.
First of all, we must know several roles: local government, local project general contractor, local project subcontractor, local trader, Chinese trader or factory.
Table of Content:
95% of solar street lights in the world are produced in China
There is no solar street light factory in European and American countries because:
Are you planning to use an all in one solar street light in your next lighting project? There are hundreds of options. Therefore, you may find the selection process to be quite confusing. Well, consider yourself lucky because this article narrows your choices by guiding you to the best three options in 2021.
Leave a Comment *